How to install tonneau cover clamps?
Installing a cargo cover on your pickup truck is a practical and stylish upgrade that enhances the aesthetics and functionality of your vehicle. For many people, the choice is to install one. However, installing a cargo cover on a truck bed is not an easy task. Many first-time installers will face a key issue in the installation process, securing the cargo cover with clamps, which can be confusing.
In this article, our experts will explain step-by-step how to install a cargo cover jig so anyone can install a compartment cover in minutes.MOSTPLUS offers the perfect solution and service for everyone.
What are tonneau cover clamps?
Tonneau cover clamps are an important device for securing the truck cover to the rails of the pickup truck compartment. These clamps securely fasten the tonneau cover to the rails, ensuring that the compartment cover stays secure while driving, even at high speeds or in harsh conditions. Typically, they eliminate the need to drill holes in the truck bed and are evenly distributed around the cover to hold it in place.
Clips come in a variety of shapes and sizes, which are determined by your type of tonneau cover and truck model. Common materials include plastic, which is high-strength aluminum or steel, durable, weather-resistant, and easy to adjust or remove when necessary.
If you have broken or lost your clamp and need a replacement, please see us to order it and we will send it out for you first.
Now that you know what compartment cover clamps are, let's take a look at the different types of clamps and how to go about installing them!
Types of tonneau cover clamps
Depending on the type of tonneau cover, we have different jigs. A soft fold or hard fold tonneau cover has the same clamp, a soft roll is another type. Each type of clamp has a specific function to fit the design of the corresponding cover. Let's take a look!
Soft Roll-up Tonneau Cover Clamps
The soft roll tonneau cover is made of lighter material such as vinyl, and the clamp is made of aluminum alloy and is primarily used to attach the side rails of the cover to the edge of the lathe. There are usually two parts, an upper part for attaching the side rails and a lower part for attaching the lathe rails.
Folding Tonneau Cover Clamps
The clamps on the folding tonneau cover will work with an aluminum or stainless steel screw. When you screw the handle in, you can start using the clamp to secure your cover.
How to install tonneau cover clamps?
Having recognized the two clamps, let's now see how to install them.
Soft Roll-up Tonneau Cover Clamps
- POSITION RAILS: Position the side rails of the soft roll-up tonneau cover along the edge of the truck compartment and align with the edge of the truck compartment.
- INSTALL CLAMPS: With the rails in place, slide the soft roll-up tonneau cover clips into place. These clips should be installed near the front, center, and rear of the truck compartment to ensure even weight distribution.
- TIGHTEN CALMPS: Use a socket wrench to tighten the clips (we no longer require a wrench on our now newer soft roll-up covers) to securely fasten the rails to the truck compartment. Do not over-tighten, too much force may bend the rails or damage the compartment cover.
- ROLLING THE TRUCK COVER INTO PLACE: After securing the clamps, roll the cover over the compartment and test the fit. The wagon cover should be tight enough to prevent movement.
Now enjoy your new tonneau cover!
Folding Tonneau Cover Clamps
The installation of folding tonneau cover clamps is much more convenient and easy than soft roll covers. Especially if you purchase our tonneau cover, all the clamps are pre-installed, and you can fix the tonneau cover directly after you receive the goods. If your clamps are not pre-installed, no problem, now follow our experts to install clamps in just a few easy steps.
- INSTALL THE CLAMPS: take a clamp, put the holes of the clamps into the screws, and insert them, screw them a few turns, and the installation is done.
- FOLD THE COVER: Fold the cover with the clamps installed to open it.
- SECURE THE COVER: take the jig from the cover, lift the clamp, and snap it onto the edge of the truck. If you don't think it's tight enough, retighten it and snap it in again.
FAQs
What is the average installation time for tonneau cover clamps?
Most clamps take no more than 15 minutes to install, folding tonneau covers can take as little as 5 minutes to install, and soft rolls take a little longer. But it depends on your skill level.
Where can you buy replacements for the tonneau cover clamps?
One might ask what to do if my jig breaks. This is when you need a replacement part for your jig. You can come to MOSTPLUS and order your clamp mounting kit, our clamps fit most compartment covers. At MOSTPLUS, we offer quality products and services. If you're not sure if it's a good fit and have concerns, you can contact our team of professional product specialists to answer any questions or concerns you may have. Order your jig mounting kit today and securely fasten your compartment cover so you can drive worry-free.
