🔥 CYBER WEEK DEALS 10% off SITEWIDE | CODE: BFD1

2014-2024 Toyota Tundra Soft Roll up Bed Cover —— Install & Review

Hey, everybody! Welcome back to another installation guide brought to you by MOSTPLUS. Today, we'll walk you through installing our soft roll-up tonneau cover on a Toyota Tundra. This comprehensive guide will ensure that your cover is installed correctly. Usually, the installation of the cover is not complicated. Following our guide, you can complete it in less than 10 minutes.

Step 1: Check All Parts and Hardware

One very important thing is to make sure your package contains all the items you need before installation. Lay out all components and verify against the provided checklist. Our package contains the following items, please check carefully:

  • Cover Assembly * 1
  • Left Side Rail * 1
  • Right Side Rail * 1
  • Seal strip * 1
  • Hex Key M4 * 1
  • Hex Key M2.5 * 1
  • Lower Clamps * 6
  • Upper Clamps * 6
  • Bolts * 6

Additional parts are available for vehicles with Utility Track.

  • Upper Alu Sider * 4
  • Steel Traps * 4
  • Convex Slider * 4
  • Long Screw * 4
  • Counter sunk Screw * 4
  • Flange Nut * 4
  • Spring Washer * 4
  • Flat Washer * 4

Missing a part will prevent you from installing it properly. If you encounter this situation, please contact our customer service and we will send you the missing part.

Step 2: Install Waterproof Seal Strips

After checking all the parts, let's move on to the first step of formal installation. Inspect the front bed rail of your pickup. If it appears noticeably lower than the side rails, you'll need to fill this gap to prevent water from leaking in. Use the provided weather seal strips to fill any gaps. This step is very important. Many people experience water leakage after installing the cover because the sealing strip is not installed properly. This step will maintain the integrity and waterproof capabilities of your tonneau cover.

Step 3: Position the Main Cover Assembly

Take the main cover assembly and place it carefully on the front bed rail. Make sure the cover completely covers the waterproof strips and that the sides are parallel to the truck side rails before moving on to the next steps.

Step 4: Attach the Side Rails

Now, take the side rails and slide their ends into the bulkheads.

Once in place, tighten the screws at the bulkhead.

You must ensure that the side rails are perfectly aligned with the inner edge of the bed rails for a seamless fit.

Step 5: Secure the Side Rails with Clamps

Next, you'll be attaching the side rails to the bed railing using the provided clamps. Slide the bottom piece of the clamp into the utility track and spread them out evenly. As you attach the top half of the clamp, make sure the jaws of the top piece are hooked fully into the inner channel of the side rails.

Tighten the clamps, but be cautious not to over-tighten, as this could cause the side rails to collapse or warp the cover.

 

Step 6: Roll Out the Cover

Unhook the safety straps and begin to roll out the cover along the Velcro tape on the side rails. As you unroll, keep adjusting the tarp to ensure it is fully stretched out along the rails. This step will help your bed cover to have a smooth, wrinkle-free appearance.

Step 7: Engage the Locking Mechanism

Once the cover is fully rolled out, try engaging the locking mechanism. If installed correctly, the latch head should fit horizontally into the groove of the tension plate. Test the functionality by closing and opening the tailgate. Carefully release the tension plate with the cable to ensure everything is working smoothly.

Step 8: Adjust the Tension Plate if Necessary

If the latch head doesn't reach the tension plate or fails to stay latched, adjust the tension plate offset along the rail. Loosen the screws slightly, reposition the plate, and retighten the screws. This fine-tuning will ensure a secure and reliable latch.

Features and Benefits of MOSTPLUS Soft Roll-Up Tonneau Cover

When you need the utility of a premium soft roll-up truck bed cover without the premium price tag, MOSTPLUS has you covered. Our affordable soft roll-up truck bed cover for Toyota Tundra offers excellent protection against the harshest elements Mother Nature can throw at you. Here are some key features and benefits:

  • Versatility: The MOSTPLUS cover is there when you need it and easily rolls up and stores at the front when you don't. This allows for full access to your truck bed whenever necessary.
  • Durability: Made from UV-resistant leather grain vinyl, the cover looks great on any truck while offering robust protection against the elements. Tight front and tailgate seals keep out dust, dirt, rain, and snow.
  • Easy Operation: To secure your cargo, simply release the safety straps, unroll the cover, and latch it closed. The preset tension control ensures the cover remains smooth and flat, providing a low-profile look.
  • Secure Storage: The roll-up bed cover keeps your belongings secure while offering easy access when needed. When using the truck bed fully, roll up the cover to the front and secure it with the safety straps.
  • Quality Assurance: At MOSTPLUS, we rigorously test all our covers to ensure they meet our high standards for durability and functionality.

In conclusion, with the MOSTPLUS roll-up cover, you don't have to choose between great functionality and great value. You can have both. Our covers are designed to make your life easier, providing reliable protection and easy access to your

Leave a comment

Please note, comments must be approved before they are published

What are you looking for?

Your cart